| Capacities |
No. 3-12” Grinder |
3-20” Grinder |
| |
The Condor
|
The Raven
|
Work Dia. Range
Standard Work rest
Low thru feed work rest (optional) |
Ø 6 to 120 mm
L = 300 mm |
Ø 12 to 150 mm
L = 500 mm |
Grinding Wheel
Dia. x Width x Bore
Minimum Dia.
Max. Wheel surface speed,
(New wheel)
Optional Surface Speed |
610 x 508 x 305 mm
432 mm45 m/sec
(9000 sfpm) |
610 x 508 x 305 mm
432 mm45 m/sec
(9000 sfpm) |
Regulating Wheel
Dia. x Width x Bore
Minimum dia.
Speed range |
305 x 305 x 127 mm
229 mm
Infinitely variable 10 to 300 rpm |
355 x 508 x 152.4 mm
267 mm
Infinitely variable 12 to 300 rpm |
Drive Motor
Grd. wheel standard
Optional
Reg. wheelHyd. unit |
30 Hp (24 KW)
40 Hp (30 KW), 50 HP (45 KW)20 Nm1 Hp (0.75 KW) |
50 Hp (37 KW), 60 Hp (45 KW),
75 Hp (56 KW)6 Nm Servo Motor1.5 Hp (1.1 KW) |
Coolant Equipment
Tank Capacity
Pump Capacity
Motor |
Optional as required |
Optional as required |
General Data
Floor Space ( L x W x H) |
3200 x 1600 x 1800 mm |
4000 x 2100 x 1800 mm |
| Approx. Weight of basic grinder. |
7700 kgs |
9750 kgs |
